Cut Resistant Gloves Level 5 – Manufacturer in India
HPPE, aramid and steel-fibre cut level 5 gloves tested to EN 388, with PU, nitrile and latex coatings. Manufactured and supplied in bulk by Sure Safety for glass, sheet metal, automotive and fabrication industries.
Lacerations are among the most common hand injuries in Indian manufacturing, especially where workers handle sheet metal, glass, blades and sharp castings. As a cut resistant gloves level 5 manufacturer in India, Sure Safety produces and supplies high-performance gloves under the Saviour brand that combine cut protection with the grip and dexterity needed on production lines.
What Does Cut Level 5 Mean?
Cut resistance is tested under EN 388. Two test methods are used:
| Test | Scale | Notes |
|---|---|---|
| Coup test (older) | Levels 1–5 | "Level 5" is the highest; less reliable for high-performance yarns that dull the blade |
| ISO 13997 TDM test | Levels A–F | Measures force in newtons to cut; mandatory when the blade dulls |
| ISO level | Cut force | Typical use |
|---|---|---|
| A–B | 2–5 N | Light handling |
| C | 10 N | General assembly, light sheet metal |
| D | 15 N | Sheet metal, glass handling |
| E | 22 N | Heavy sheet metal, sharp castings |
| F | 30 N+ | Blades, glass manufacturing, recycling |
A traditional "cut level 5" glove usually aligns with ISO levels C to F depending on construction. When comparing gloves, always ask for the ISO letter on the EN 388 marking.
Yarns and Coatings Used in Level 5 Cut Gloves
HPPE
High-performance polyethylene: cool, light and flexible, with strong cut resistance.
Aramid (Kevlar®)
Cut and heat resistance together; ideal near hot parts.
Steel / glass fibre composite
Adds very high cut resistance for ISO E–F ratings.
PU coating
Thin, breathable, excellent dexterity on dry parts.
Nitrile / sandy nitrile
Grip on oily and greasy components.
Latex crinkle
Strong wet grip for glass and wet handling.
Gauges range from 18G and 15G (thin, high dexterity) to 13G and 10G (heavier duty). Options include extended cuffs, thumb crotch reinforcement and touchscreen fingertips.
Applications
- Sheet metal pressing, stamping and fabrication.
- Automotive body shops and component assembly.
- Glass manufacturing, cutting and installation.
- Blade changeovers in paper, packaging and food processing.
- Metal recycling, scrap sorting and warehousing.
- Construction: handling rebar, ducting and roofing sheets.
Why Buy from a Cut Resistant Gloves Manufacturer in India?
Buying directly from a manufacturer gives you consistent quality across large batches, competitive factory pricing, faster replenishment and the option of custom colour coding by department or ISO level. Our team can run on-site wear trials and recommend the lowest-cost glove that meets the hazard — over-specifying wastes budget, under-specifying causes injuries. Learn about our manufacturing facility.
Selection Checklist
- Identify the sharpest edge in the task and the required ISO cut level.
- Choose the coating based on whether parts are dry, oily or wet.
- Select gauge for dexterity vs durability.
- Check whether heat or chemical resistance is also required.
- Run a two-week wear trial before standardising.
Note: cut-resistant gloves are not puncture-proof. For needles or wire-rope hazards, ask for puncture-rated designs. For mixed hazards, explore our 500°C heat resistant gloves and full glove range.
Why Buy Cut Resistant Gloves from Sure Safety?
Sure Safety (India) Limited is a Vadodara-based manufacturer and supplier of industrial safety equipment under the Saviour brand, alongside trusted international brands such as 3M, Honeywell, Ansell and BATA. We supply cut resistant gloves to glass, automotive, sheet metal and fabrication across India, with documentation that stands up to customer audits and statutory inspections.
- Certified products: test certificates and technical data sheets supplied with every order.
- Technical selection support: our safety engineers recommend the right specification for your hazard, not just the cheapest option.
- Bulk and rate-contract pricing: direct manufacturer rates for factories, contractors and annual contracts.
- One vendor for complete PPE: combine this order with gloves, footwear, helmets, eye protection and fire safety items for consolidated delivery.
- Training and audits: PPE audits, safety training and industrial hygiene consulting from the same team.
Share your quantity, size or specification and delivery location, and we will respond with a quotation and recommended options. Explore our complete range on the safety equipment suppliers in India page.
Frequently Asked Questions
Is cut level 5 the highest protection?
Level 5 is the highest on the older Coup scale. Under the ISO 13997 test, protection goes up to level F, which is more meaningful for modern high-performance gloves.
Can cut resistant gloves be washed?
Most HPPE and aramid gloves can be washed at moderate temperatures, which extends service life. Follow the care label.
Do you supply cut level 5 gloves in bulk?
Yes, we manufacture and supply in bulk cartons with consistent batch quality and optional colour coding.
Are cut gloves suitable for oily parts?
Yes, choose nitrile or sandy nitrile coated versions for grip on oily components.
Order Level 5 Cut Resistant Gloves Direct from the Manufacturer
Share your quantity, application and delivery location — our team responds with a technical recommendation and a competitive quotation.